6. Network Setup
39
3
General Setup
- Ethernet Mode: If using static IP, set to “Static” and then setup the following settings. If there is a DHCP
ork, HCP”, the device will get the following settings from the server
automatically.
- IP Address: Set the IP address of the device.
- Subnet Mask: Set the subnet mask.
- Gateway: Set the IP address of the gateway on the network.
- MAC Address: Shows the MAC address of the device.
- HTTPS: on/off the HTTPS option.
- HTTP Port: Change the port if necessary.
- nge the port if necessary. Default port is recommended.
RTSP End: Change the port if necessary. Default port is recommended.
DNS1 / DNS2: Set the IP address of the DNS server.
Apply: Confirm the settings.
server on the netw set to “D
- RTSP Port: Change the port if necessary. Default port is recommended.
RTSP Start: Cha
-
-
-
Comments to this Manuals